hi

i live inthe UK, just bought an upright after burner with no monitor, i just wanted some advice what would work if i can't source an original sega 20", as so far i am struggling

hereis the spec:

# Orientation: Horizontal
# Type: Raster: Standard Resolution
size: 20"
STANDARD RESOLUTION

HORIZONTAL VERTICAL
Scan Frequency: 15.72 KHz Scan Frequency: 60.0 Hz
Scan Period: 63.6 µSec Scan Period: 16.7 mSec
Active Video: 46.9 µSec Active Video: 15.3 mSec
Video Delay: 11.9 µSec Video Delay: 1.2 mSec
Sync Pulse: 4.7 µSec Sync Pulse: 0.2 mSec
Scan Line: 456 Pixels Screen: 262 Lines
Resolution: 336 Pixels Resolution: 240 Lines
Clock Freq: 7.16 MHz
sega part number: 200-5095

2 connectors feed into the monitor....one is power i think, 4 pin block, one is video data i think, 5 pin block. i can provide photos of these if needed


thanks in advance!

There's a number of 15khz monitors that should work perfectly with your cab. I'd check eBay international. I've seen plenty there the last few months. If you're unsure if the monitor fits your cab/board then ask the seller. Most of those selling arcade stuff on eBay are arcade freaks and should have a pretty good idea what you need.